100 Amp Automatic Electrical Transfer Switch , Copper T3 , DMC V0 ,
Home Power Transfer Switch For Generator
* HGLZ-100A-1600A. The load isolation switch is suitable for the
changeover of two sets of low voltage electric circuit or the
changeover of 2 sets of load devices or safety isolation.
* Mode of operation:Direct operation: handle is installed on the
switch.Operation outside the board: handle is installed outside the
door of power distributing boa rd.
* Products with observation windows can be provided according to
the demand to observe directly the on and off state of contact.
* The products have three poles, four poles ( three poles+on and
off neural pole ).
* Extended shaft is used for the operation outside the board.
* Two sets of auxiliary contacts can be assembled acording to the
* Mechanical performance and electrical performance correspond to
the mechanical property of HGL2-100A-1600A.
* A bridge can provided to connect the inlet or outlet terminal of
* The electric cable insulating cover can be assembled.
|Rated current In(A)||125||160|
|Rated insulation voltage Ui (V)||690||690|
|Dielectric strength (V)||1890||1890|
|Rated surge-resistant voltage Uimp KV||8||8|
|Rated working current||380v||AC-21B||125||160|
|Rated short-time withstand current lcw (kA Rms) 0.1s/1s||8||8|
|Rated breaking capability Icn (A Rms) AC23 380 V||1000||1000|
|Rated making capability Icm (A Rms)AC23 380V||1250||1600|
|Rated shortcurrent making capabilityIcm||13.6||13.6|
|(kA peak value)|
|Mechanical durability 380V||1400||1400|
|Electical curability 380V||200||200|